User:DisturbHerb/Guide to the Printing Press

A man with a veritable collection of books printed with custom colours.

The printing press is a large object spanning two tiles that allows you to print custom books with anything you want on the inside! The books that it prints are very customisable, with the ability to change the cover, information such as the author and title, and they can be formatted with code. This guide will show you how to print these.

Printer operation

Where are the printers?!

With few exceptions, there aren't typically printing presses on-station at the start of a round. In most cases, you'll have to build it yourself. However, the library in Donut3 starts with an empty printing press.

Building the thing

To build a printing press, you'll need to buy the printing press crate from Cargo which costs 5000 credits of the station's shipping budget. In the crate is a printing press frame that can be deployed when you use a soldering iron on it. When deploying, however, keep in mind that:

• The left side of the device will be deployed on the tile where the frame is.
• The right side of the device will be one tile to the right of the frame.
• If the device cannot fit, it will attempt to deploy one tile to the left.
• If there is no space available at all, the device will fail to deploy.

A piece of paper detailing this information is also included with your order.

Ink and paper levels

An animation of the printing press's ink and paper indicators.

When built, printing presses don't start with any ink or paper; you'll have to insert it yourself! Simply use a paper bin on the press to load all its sheets into the machine and the same applies to ink cartridges. The printing press's maximum capacity is 5 ink cartridges and 70 sheets of paper; enough for 45 books!

On the printing press, there is a visual indicator to roughly gauge how much ink or paper is within the machine as shown on the animation to the right. The black bar on the body of the machine represents ink levels, while the white stack on the right represents the repository of remaining paper. You can also examine the printing press to get a general idea of how much paper is left.

Customising the output

Choose cover

There are two different ways of setting the cover of the book; the confusingly named "Choose cover" and "Customise cover" options. If "Choose cover" is selected, you can select a book cover based off of a pre-made lineup; including many book covers for books that exist in-game as well as some unique ones. The covers and their names are in the table below.

Grey	Dull Red	Red	Blue	Green	Yellow	Dummies	Robuddy	Skull
Latch	Bee	Albert	Surgery	Law	Nuke	Rat	Pharma	Bar

The following covers can only be unlocked after using a bootleg printing press module on the printing press.

Necronomicon	Bible	Old

The other option, "Customise cover", is only available if a printing press cover module is installed in the machine. If selected, you can customise the colour of the colour as well as adding a symbol and/or flair with customisable colours.

Set book info

IMPORTANT: BOOKS WILL NOT PRINT CORRECTLY UNLESS THIS IS FILLED. THE CONTENTS WILL BE BLANK, WHICH IS USUALLY UNDESIRABLE!

In choosing this option, you can set the author of the book as well as its title. Be creative! Or... not!

Book contents

This is where you input the actual text inside the book. Simply type in the desired contents, which will be on the printed book. There's a character limit of 4096, currently.

Paper code

As of the writing of this article in mid-2021, the code for formatting paper books has diverged drastically from normal paper since the introduction of tgui paper. Text on a book can be formatted by sandwiching it with the following tags.

Name	Syntax	Result
Huge header	[h1]Huge Header[/h1]
Large header	[h2]Large Header[/h2]
Medium header	[h3]Medium Header[/h3]
Small header	[h4]Small Header[/h4]
Bold	[b]Bold[/b]
Italic	[i]Italic[/i]
Underline	[u]Underline[/u]
Superscript	Text[sup]Superscript[/sup]
Block quote	[bq]Block Quote[/bq]
Unordered list	Unordered list:[li]List Item A[/li][li]List Item B[/li]
Horizontal rule	[hr]

Amount to make

Self-explanatory, you set how many books to print here. Luckily for you, the maximum amount you can print is also displayed in the window that pops up.

Print books

Self-explanatory, it prints the amount of books specified by the above option. Make sure the information you entered is all correct before printing, as this action is irreversible!

View information

Allows you to look at the name of the author and the title of the book set by the machine.

Ink color

This option is only available with the colors upgrade module. When selected, you can set the colour of the text that is printed to any RGB value you'd like.

Printing paraphenalia

Item	Image	Description
Printing Press		The machine itself. It must be assembled from the printing press frame. The output of the machine is highly variable and can be adjusted to the user's liking; down to the book's contents, information, number of copies to print at a time, and more!
Paper Bin		A bin that starts with 10 sheets of (usually) empty paper. These can be picked up by click-dragging the object onto your character. To load all the sheets of paper at once into the machine, simply click the press with the paper bin. While they can be found in office supply crates, they can also be bought from Cargo in office supply, bureaucratic, and printing press refill supply crates.
Ink Cartridge		A cartridge of ink for printing books. The printing press's internal reservoir can hold 5 of these, and one cartridge can print 50 books!
Colors Upgrade Module		A printing press upgrade module that allows you to change the colour of the printed text to any RGB value you'd like!
Cover Upgrade Module		A printing press upgrade module that allows you to make fully customisable covers for your books, rather than using the premade lineup!
Bootleg Upgrade Module		A forbidden and very spooky printing press upgrade module. It adds three more premade covers and a few more symbols and flairs for custom covers!