Construction
All this assumes you've figured out the game pretty well so far. You have, right?
Makin'
Weapons
Bombs
Butt bomb
Harmless prank. Works like a grenade.
You will need:
A butt A timer
To build:
Add the timer to the butt.
Suicide bomb vest
Despite the name, no bombs are actually involved anymore. The payload will be triggered upon death of whoever is wearing the vest, heating the mixture inside the beaker by 30 K (see ignition temperatures) when so equipped. If required, the payload can be removed with a wrench.
You will need:
A regular ballistic vest A health analyzer An igniter A grenade OR beaker (Only grenades with this sprite are compatible:) A screwdriver A wrench (optional)
To build:
Use a screwdriver on the igniter. Combine the igniter with the health analyzer. Secure the assembly with the screwdriver. Click on the assembly with the vest to combine them. If you intend to use the beaker, prepare a chemical mix of your choice. To attach a grenade, use it on the vest. To attach a beaker, click on it with the vest - not the other way around!
Rigged light tube/power cell
A rather uncommon and creative way to booby-trap machinery or whole rooms. It is not a bad idea to turn the power off before installing either of them.
You will need:
A light tube OR power cell A syringe of liquid plasma
To build:
Inject the light tube or power cell with plasma.
Pipe bomb
Not to be confused with the version traitors can order. Other materials can be used in place of welding fuel if available. Ordered by explosive power: phlogiston, CLF3, black powder or NI3. Plasmastone and erebite work differently in that they are crafted from custom metal sheets, then combined with one of the listed reagents.
You will need:
3 metal sheets A cable coil An igniter A timer A container (beaker, glass etc.) of welding fuel (20 units) A welder A screwdriver
To build:
Turn the metal sheets into a pipe frame. Use the welder on the frame. Fill the frame with welding fuel. Add some wires. Use a screwdriver on the igniter. Combine the igniter with the timer. Add the timer/igniter assembly to the pipe frame.
Mousetrap bomb
Compatible with pipe bombs (regular, Syndicate) and most grenades. They can be used as makeshift mines or to booby-trap backpacks and other containers. Can be taken apart with a wrench if required.
You will need:
A mousetrap A pipe bomb OR grenade (Only grenades with this sprite are compatible:
To build:
Attach the pipe bomb or grenade to the mousetrap. Don't forget to arm the mousetrap by clicking on it before use.
Mousetrap car
A mousetrap bomb on wheels. Once set in motion, the cart will scoot off in whichever direction you're facing and detonate the grenade upon impact with a large object or unfortunate bystander. Can be taken apart with a wrench if required.
You will need:
3 metal sheets A mousetrap bomb (grenade only) A wrench (optional)
To build:
Turn the metal sheets into a pipe frame. Combine the mousetrap bomb with the pipe frame.
Mousetrap pie launcher
For the seasoned prankster. Go on...open it! (Or just take it apart with a wrench.)
You will need:
A mousetrap A left or right arm (any type) A pie (any type) A wrench (optional)
To build:
Attach the arm to the mousetrap. Add the pie. Don't forget to arm the mousetrap by clicking on it before use.
Single tank bomb
Also known as plasma tank assemblies. Less powerful than transfer valve bombs, but they still fit in backpacks. You'll have to discover suitable gas mixtures yourself.
You will need:
A plasma tank An igniter A timer OR proximity sensor OR remote signaller A screwdriver A welder
To build:
Fill the plasma tank with a gas mixture of your choice. Use a screwdriver on the igniter. Combine the igniter with the timer, proximity sensor or remote signaller. Secure the assembly with the screwdriver. Attach the assembly to the plasma tank. Weld a hole in the tank.
Transfer valve bomb
Big bombs for a big bang. Again, this guide won't tell you how to create the perfect explosive mix, so feel free to sign up as a scientist and mess around with the equipment in the laboratory. You should also use the mainframe and VR goggles to run simulations instead of testing your bombs on the station.
You will need:
A tank of heated gas (Tip: usually involves plasma.) A tank of a reactive gas (Tip: ...and oxygen.) A tank transfer valve A timer OR proximity sensor OR remote signaller
To build:
Connect the first tank to the transfer valve. Do the same with the other tank. Attach the timer, proximity sensor or remote signaller to the transfer valve.
Canister bomb
Massive bombs. As usual, the gas mixture is not revealed, only the assembly process.
You will need:
A canister full of an explosive gas mixture. A plasma tank filled to at least 700 kPa of pure plasma. A timer An igniter A cable coil A screwdriver A multitool A station bounced radio (optional) - Creates a command report upon priming. A remote signaller (optional) A crowbar (optional) A pair of wirecutters (optional) Suitable attachment class items (optional, see list below)
To build:
Use the screwdriver to unsecure the igniter. Add the multitool to the igniter. Add the plasma tank to the assembly. Secure the assembly with a screwdriver. Use the cable coil on the assembly. Add the timer to the assembly. Optionally, add the station bounced radio to your assembly. Optionally, add a remote signalling device to your assembly. Optionally, add up to three attachment class items to your assembly. Use the assembly on the canister.
The detonator assembly may have up to 3 attachment class items. Each attachment adds an additional wire to the assembly, each having a unique effect. You may have more than one of any type of attachment.
An analyzer (Detonates the bomb if the gas is leaking from the canister.) A power cell (Adds an additional detonation wire.) A flash (Occasionally flashes nearby people.) A sheet of paper and a pen (Adds a note to the canister bomb interface.) A bike horn (Self-explanatory.) A vuvuzela. (Ditto.)
Detonators may be disassembled if necessary. A screwdriver is required to unscrew and a crowbar is required to pry out the plasma tank, and everything else can be cut apart with the wirecutters. Attachments may be removed from the assembly with a screwdriver.
Stun gloves
Your intent must be set to harm in order for the gloves to work. They only hold one charge at a time.
You will need:
A pair of insulated gloves OR power gloves A charged power cell A cable coil
To build:
Add some wiring to the gloves. Use the power cell on the gloves to charge them.
Flamethrower
Welding fuel is a solid choice. You can also fill the tank with other reagents, so there is plenty of room for experimentation. See Chemistry for more information.
You will need:
A welder One rod An igniter An air mix OR oxygen tank A fuel tank A screwdriver
To build:
Use the screwdriver on the welder. Attach the rod to the welder. Combine the igniter with the welder/rod assembly. Secure the assembly with the screwdriver. Attach the air mix or oxygen tank to the assembly. Add the fuel tank to the assembly.
Zip gun
You can use different types of ammunition, of which .38 Special is easiest to obtain from a hacked general manufacturer. The zip gun holds two rounds at a time.
You will need:
3 metal sheets A welder A staple gun
To build:
Turn the metal sheets into a pipe frame. Use the welder on the frame. Combine the the staple gun with the frame.
Flash/cell assembly
In addition to stunning people like any other flash, this overcharged version also sets them on fire. Unlike a regular flash, it will only work once.
You will need:
A flash A charged power cell A screwdriver
To build:
Open the flash's battery compartment with the screwdriver. Attach the power cell to the flash.
Poisoned surgery tools
Scalpels and saws can be dipped in a poison or other reagent for fun and wacky effects upon stabbing.
You will need:
A scalpel OR saw A filled container (beaker, glass etc.)
To build:
Dip the scalpel or saw in the beaker.
Miscellaneous assemblies
Timers and other basic tools may be put together as assemblies, most of which can function as bomb detonators. Not included is the health analyzer/igniter combination, a suicide bomb vest-specific trigger.
Igniter assembly
The bread-and-butter choice for most situations.
You will need:
An igniter A timer OR proximity sensor OR remote signaller A screwdriver
To build:
Use the screwdriver on the igniter. If you intend to employ a signaller, use the screwdriver on it as well. Combine the igniter with the timer, proximity sensor or signaller. Secure the assembly with the screwdriver.
Signaller assembly
A standalone, proximity- or timer-activated radio. Doesn't work as an attachment, but can come in handy to remotely trigger bombs or door bolts.
You will need:
A remote signaller A proximity sensor OR timer A screwdriver
To build:
Use the screwdriver on the signaller. Attach the signaller to the proximity sensor or timer. Secure the assembly with the screwdriver.
Beaker assembly
These assemblies are quite popular to release chemical smoke from a safe distance - for the user at least. Deadly in the hands of a skilled chemist. When triggered, the igniter will heat the mixture by 30 K (see ignition temperatures). To detach the beaker, place the whole thing on the floor and use the context menu by right-clicking on it.
You will need:
A beaker An igniter assembly A screwdriver
To build:
If the assembly has been secured beforehand, undo that with the screwdriver. Prepare a chemical mix of your choice. Combine the igniter assembly with the beaker. Secure the beaker assembly with the screwdriver.
Chemical grenade
The starter kit generally can't be acquired without a traitor scientist's PDA. See Murder for more information.
Note: You can't retrieve the beakers after securing the grenade, so make sure your chemical mix works beforehand!
You will need:
A grenade starter kit Up to 2 beakers A screwdriver
To build:
Add the fuse to the grenade casing. Prepare a chemical mix of your choice. Add the beaker(s) to the unsecured grenade. Secure it with the screwdriver.
Chemical grenade assembly
Combines the advantages of chem grenades (two beakers) with the versatility of beaker assemblies.
You will need:
A chemical grenade (Anything that looks like this:
To build:
Combine the igniter assembly with the chem grenade.
Walls, Doors, and Floors
Metal Walls
While a variety of metals may be used to create sheets and rods, different materials can't be used interchangeably within the same construction project. For example, it's impossible to add mauxite plating to a steel girder.
Regular
You will need:
Four sheets of metal
To build:
Click on the metal while you're holding it. Choose Wall Girders. Add plating by clicking on the girder with the metal.
Reinforced
You will need:
Four sheets of metal Two rods
To build:
Click on the metal while you're holding it. Choose Wall Girders. Combine the remaining metal sheets with the rods twice. Pick up and stack the reinforced metal sheets and then click on the girder to reinforce it. Use the remaining reinforced metal sheets to add the plating.
Glass Walls/Windows
Regular window (one direction)
Windows will be build in the direction your mob is facing. They are fastened to the floor by default.
You will need:
One sheet of glass A screwdriver (optional)
To build:
Click on the glass while you're holding it. Choose Thin Window. Optionally, unsecure the window by using the screwdriver, then then right-click and choose rotate to reorient the window.
Regular window (full)
You may push/pull this window around. By default, they are not fastened to the floor.
You will need:
Two sheets of glass A screwdriver (optional)
To build:
Click on the glass while you're holding it. Choose Large Window. Optionally, secure the window by using the screwdriver.
Note: Glass made of different types of material can't be used interchangeably within the same construction project.
Reinforced window (one direction)
Windows will be build in the direction your mob is facing. They are fastened to the floor by default.
You will need:
One sheet of glass One rod A screwdriver (optional) A crowbar (optional)
To build:
Combine the rod with the glass sheet. Click on the glass while you're holding it. Choose Thin Window. Optionally, unsecure the window by using screwdriver-crowbar-screwdriver. Optionally, right-click and choose rotate to reorient the window.
Reinforced window (full)
You may push/pull this window around. By default, they are not fastened to the floor.
You will need:
Two sheets of glass Two rods A screwdriver (optional) A crowbar (optional)
To build:
Combine the rods with the glass sheets. Pick up and stack the reinforced glass sheets. Click on the glass while you're holding it. Choose Large Window. Optionally, secure the window by using screwdriver-crowbar-screwdriver.
Note: Glass made of different types of material can't be used interchangeably within the same construction project.
Floors
Regular floors can be made in space by: - using rods first on empty space, creating a lattice - then placing a floor tile on top of it (floor tiles can be made from a sheet of metal) Use another floor tile on the plating to create a regular floor. Fire-resistant floors can be made using one floor tile, and one rods Use rods on plating to create a floor similar to the engine floor
Barricades
Barricades can be made in space by: - using rods first on empty space, creating a lattice - then using more rods on the lattice to create the barricade - and can be reinforced with even more rods
Hidden Doors
While a variety of metals may be used to create sheets and rods, different materials can't be used interchangeably within the same construction project. For example, it's impossible to add mauxite plating to a steel girder.
Hidden Door - Regular Wall
You will need:
Four sheets of metal A crowbar
To build:
Click on the metal while you're holding it. Choose Wall Girders. Use the crowbar on the girder to dislodge it. Add plating by clicking on the girder with the metal.
Hidden Door - Reinforced Wall
You will need:
Four sheets of metal Two rods A crowbar
To build:
Click on the metal while you're holding it. Choose Wall Girders. Use the crowbar on the girder to dislodge it. Combine the remaining metal sheets with the rods twice. Pick up and stack the reinforced metal sheets and then click on the girder to add the plating.
Entire Rooms
ABC-Us and blueprint markers can be found in the supply warehouse. You don't need to replicate entire rooms. You can pick a section of it or multiple sections to create different rooms. The blueprint marker can create multiple blueprints before running out of energy. This way you can pick all the pieces you want in advance and put them together in a new configuration. Remember to save them with their own names so you don't get them mixed.
You will need:
ABC-U (Automated Blueprint Construction Unit) Blueprint marker Metal and glass sheets
To build:
Select tiles using blueprint marker. Print a blueprint from the marker and put it in the ABC-U. Check the material cost on the ABC-U and load accordingly. Drag the ABC-U in position, lock it down and make it start building.
Note: ABC-Us can only make new rooms on space tiles.
Misc.
Table
You will need:
Two sheets of regular OR reinforced metal
To build:
Click on the metal while you're holding it. Choose Table Parts. Pick up and click on the parts to build a table.
Electric Chair
To change the default frequency/code, you must click on the electropack while you're holding it, and modify it from the pop-up interface. Electric chairs can be remotely activated, but must be toggled on before usage (right click, and select controls). Also, the room must have power for the chair to work.
To disassemble the chair, use a wrench.
You will need:
An electropack A security helmet One sheet of metal A remote signaler (optional) A wrench (optional)
To build:
Click on the metal while you're holding it. Build a chair. Optionally, change the electropack's default frequency and code. Use the helmet on the electropack. Attach the helmet/electropack assembly to the chair.
Station Bots
Cyborgs
See Roboticist
AI shells
See Roboticist
Other robots
See Robots
Skull mask
Custom masks are named after the former owner of the skull.
You will need:
A skull A circular saw
To build:
Hollow out the skull with the circular saw.
Skull chalice
You will need:
A skull One rod
To build:
Use the rod on the skull.
Paper mask
Standard pens contain black ink, and you can also use a red or blue marker.
You will need:
A sheet of paper A cable coil A pair of scissors or wirecutters A pen (optional)
To build:
Cut the paper with the scissors or wirecutters. Use the cable coil on the unfinished mask. Optionally, colour the mask with the pen.
Bucket helmet
You will need:
A bucket A pair of wirecutters
To build:
Cut eye holes with the wirecutters.
Computers
Console
Intended for computers built from a single circuit board. Console frames don't accept mainboards and peripheral cards.
You will need:
5 metal sheets 2 glass sheets A cable coil A wrench A screwdriver One circuit board
To build:
Click on the metal and choose 'Console frame'. Wrench the frame into place. Insert the circuit board. Use the screwdriver. Add wires. Use the glass on the frame. Connect the monitor with the screwdriver.
Terminal
Useful for computers built from components and peripherals. Wired computers (as in part of a network) will need to be positioned over a data terminal (deployable with the help of a mechanic), which in turn has to be connected to the power grid.
You will need:
3 metal sheets 1 glass sheets A cable coil A wrench A screwdriver A computer mainboard Up to 2 peripheral cards (An ID scanner module is pretty much mandatory.) A storage drive
To build:
Click on the metal and choose choose 'Computer terminal frame'. Wrench the frame into place. Insert the computer mainboard. Use the screwdriver. Insert the peripheral cards (up to 2). Add wires. Insert the storage drive. Use the glass on the frame. Connect the monitor with the screwdriver.
Heavy
Some of the components are slightly different, but the construction plan is otherwise the same.
You will need:
5 metal sheets 2 glass sheets A cable coil A wrench A screwdriver A computer mainboard Up to 3 peripheral cards (An ID scanner module is pretty much mandatory.) A storage drive
To build:
Click on the metal and choose choose 'Computer frame'. Follow the Terminal guide for the rest.
Fixing bombed APCs
This is for APCs that have been completely broken (They have a damaged sprite and the area is left unpowered), not APCs that have had their wires shorted.
You will need:
screwdriver wrench multitool 4 pieces of wire
To fix:
Use the screwdriver on the APC. Add the wire. Wrench the APC. Apply the mulitool. Finally, use the screwdriver on it again.
Fixing microwaves
If the microwave is just dirty, use a spray bottle of space cleaner. A completely broken unit has to be fixed with some tools.
You will need:
screwdriver wrench
To fix:
Use the screwdriver on the microwave. Finish the job with a wrench.
Fixing manufacturers
You will need:
A screwdriver A welder OR cable coil
To fix:
Open the maintenance panel with the screwdriver. Depending on the severity of the damage, use the welder (light) or cable coil (heavy). Use the screwdriver again to close the panel.
Jack-o'-lantern
You will need:
Pumpkin Chainsaw or knife Flashlight
To build:
Use the chainsaw or knife on the pumpkin to carve it Use the flashlight on the carved pumpkin
Note: Click the jack-o'-lantern to light it
Rocket Shoes
You will need:
Emergency oxygen tank Any pair of normal shoes
To build:
Use emergency oxygen tank on shoes
Note: It will run out of gas after two uses. Do not expect much in the way of steering.
Shackles
Forces the wearer to move at walking speed. Shackles can be taken apart by holding them in an active hand and clicking on them.
You will need:
A pair of orange shoes A pair of handcuffs
To build:
Use the handcuffs on the orange shoes.
Armored Biosuit
You will need:
A biosuit A regular ballistic vest
To build:
Attach the body armor to the biosuit.
Armored paramedic suit
You will need:
A paramedic suit A regular ballistic vest
To build:
Attach the body armor to the paramedic suit.
Armored firesuit
You will need:
A firesuit A regular ballistic vest
To build:
Attach the body armor to the firesuit.
Ghost disguise
You will need:
A bedsheet A pair of scissors or wirecutters
To build:
Cut eye holes with the scissors or wirecutters.
Cape
You will need:
A bedsheet A cable coil
To build:
Use the cable coil on the bedsheet.
Space Pod
Be advised that you have to stand adjacent to the south west corner of the pod in order to construct it, since it is a 64x64 sprite. Use a bottle of champagne on the finished pod to give it a unique name.
You will need:
A pod frame kit A box of pod circuitry A pod control interface An engine manifold A set of pod armour A paint job kit (optional) A cable coil 5 metal sheets 5 reinforced glass sheets A wrench A welder
To build:
Deploy the frame kit by clicking on the box. Wrench the jumble of metal. It should look less like a pile of junk. Wrench again. It should look like a functional but unsecured frame of a space pod. Use the welder. Insert wires. Place the circuitry inside the frame. Add metal to the frame. Install the engine manifold. Put armor on the pod frame. Use the welder. Install the control interface. Add the reinforced glass sheets. Optionally, use the paint job kit on the finished pod.
MiniPutt
Some of the key components are slightly different, but the construction plan is otherwise the same. And as with space pods, you can rename the finished craft with a champagne bottle.
You will need:
A MiniPutt frame kit A box of MiniPutt circuitry A MiniPutt control interface A MiniPutt engine manifold A set of pod armour A paint job kit (optional) A cable coil 3 metal sheets 3 reinforced glass sheets A wrench A welder
To build:
Follow the Space Pod guide.
Light fixtures
These fixtures, installed by Nanotrasen or otherwise, are controlled by the local APC. However, custom fixtures cannot be attached to reinforced walls. Light tubes may be obtained from boxes (ask the janitor) or a general manufacturer.
You will need:
A regular wall Two metal sheets A light tube
To build:
Turn the metal sheets into one set of light fixture parts. Attach the parts to a regular wall. Insert the light tube.
Building and fixing disposal pipes
Like most things in Space Station 13, the plumbing system is surprisingly deep. A skilled space plumber can set you up for a wild ride that'll send you racing through most of the station and spit you out from a mailbox. Now you can be that skilled plumber.
The building blocks
There's a few pipe dispensers scattered around the station. The most easily accessible one can be found in disposals. Pipes come in 8 variations, 5 of which the dispensers will provide:
Straight - Straight tube.
Bent - Tube bent at a 90 degree angle.
Junction - A three-way junction. The arrow indicates where items exit.
Y-junction - A three-way junction with another exit point.
Trunk - Entry and exit point for pipes. Disposal and mail chutes come pre-connected to these, but players can't connect on their own.
Mail-junction - Not available from the dispenser. A three-way junction with a filter that only allows items to pass through. People and creatures will be diverted away into the side-pipe. Visually distinguished from regular junctions by a red dot on the pipe.
Controlled pipe segments - Specialized equipment available to mechanics.
Managing your pipes
Pipes come in four states:
Free - Can be moved, rotated and flipped over by right-clicking on them.
Wrenched - Wrenched to the floor. Immobile and inoperable. You can walk over them and rotate them.
Welded - Welded to the floor. Immobile and can't be rotated. Fully operable.
Broken - Welded to the floor. Inoperable. Must be welded at all ends to remove.
You need three tools. A crowbar to remove the tiles covering the floor. This exposes existing pipes and lets you place new pipes. A wrench to fasten free pipes. A welding tool to make wrenched pipes operable or to loosen welded pipes.
Controlling the flow
Take these tips to heart and you'll be a plumbing like a champion in no time.
- T-ray scanners show you pipes hidden under floor tiles.
- Always wrench the pipe in place before welding it. Poorly secured pipes will break the floor tile covering it and fall out of place.
- Items will follow the pipeline from chute to exit point as long as every piece is connected, nothing is broken and there's no blockage.
- Items entering a junction from the wrong end (the side with the exit arrow), will randomly go out one of the two other sides.
- Fat people are poorly suited for pipes and can easily create a blockage. Blockages can be cleared by unwelding the blocked section.
- Pipelines ending in a regular pipe will shoot things out in a straight line. Trunks eject items in random directions.
- Combine with programmable electronics components to make some truly wild rides.
Breakin'
For more, see Hacking
Note that almost everything can be destroyed with a bomb.. but we hope you don't get that desperate.
Walls, Doors, and Floors
Airlock
Screwdriver on Airlock Click Airlock (without screwdriver in hand) Have a Multitool in hand to test which wire does what Have a Wirecutter to cut or mend desired wire(s) If test light is on and bolts are down, pulse the wires to raise bolts. Crowbar opens unpowered doors with raised bolts Screwdriver the door to close it up when finished. Crowbar also opens powered doors, whose test lights are off,and the bolts up.
Door wiring is randomized per game, but all doors have the same wires. Using a multitool to pulse wires will only work if the door has power. Cutting wires can rid the door of some features (AI Control for instance) until the said wire is mended.
Ghetto Door hacking works on all doors:
Screwdriver on some random Airlock Wirecutters on Airlock Cut everything until the bolts drop, make a note of which color does this Leave Screwdriver the Airlock you want to open Wirecutters, cut every other wire except that one Crowbar the door
Firedoors
Crowbar to Open/Close Welder to seal Closed
Metal Grille
Wirecutter to destroy, welder to remove what's left OR Screwdriver to remove/re-secure
Some grilles are electrified, as such it would be wise to have Insulated Gloves on before attempting to destroy or dislodge it. Alternatively, hit it repeatedly with a shard of glass to avoid a shock.
Glass Windows
Welder to break OR Screwdriver to loosen, then push out OR Bashing object to break
Reinforced Windows
Screwdriver Crowbar Screwdriver OR Bash in with heavy object(Fire Extinguisher takes approximately five hits)
Regular Walls
Welder Screwdriver on 'Wall' to dislodge girders OR Wrench to dismantle girders
Note that the metal plates created by doing this obscure most of the 'wall', so be sure you are clicking on the right thing.
Reinforced Walls
Wirecutter Screwdriver Welder Crowbar Wrench Welder Crowbar Screwdriver Wirecutter Wrench
Note: Wait 5-8 secs for each to complete.
Hidden Doors - Regular and Reinforced Walls
To disassemble:
Screwdriver Wrench
Computers
Console
To Break:
Screwdriver Crowbar Wirecutters Screwdriver Crowbar (removes circuit board) Wrench Welder
Note: Not all computers can be dismantled.
Terminal/Heavy
To Break:
Screwdriver Crowbar Crowbar (removes hard drive) Wirecutters Crowbar (removes all modules) Screwdriver Crowbar (removes motherboard) Wrench Welder
APC
Screwdriver Click on APC and drag the windows away from each other so you can see both at once Get wirecutters out of your toolbox/backpack/pockets and use them on the APC with the windows still open
There are four wires. Two short out the APC when cut, one cuts AI control when cut, and one does nothing when cut, but unlocks the APC when pulsed with a multitool. There's a chance you'll get shocked when cutting wires, so either have insulated gloves or do it in an isolated area where no-one will find you. South maintenance is a good choice.
Fire Alarms, Security Cameras, and Atmosphere Alarms
Wirecutter to Break, and Fix
Manufacturers
Keep in mind that completely dismantled fabricators can't be replaced without the help of electronics!
You will need:
A wrench A crowbar A wirecutters
To break:
Open the outer cover with the wrench. Use the crowbar to pry off the cover. Remove the wiring with the wirecutters. Undo the final bolts with the wrench.
Light fixtures
You will need:
A light fixture A screwdriver An ID card with engineering access
To break:
Unlock the local APC and turn off the lighting circuit. Remove the light tube or bulb. Use the screwdriver on the light fixture to disassemble it.
Obsolete Junk
Removed or otherwise obsolete construction plans kept for reference.
Fixing Propulsion Thrusters
Technically working, but shuttle engines cannot be damaged anymore. It was previously possible to immobilize them by disabling the thrusters.
You will need:
A screwdriver EVA gear (optional, but recommended)
To fix:
Use the screwdriver on the thruster to secure its outer frame. Do the same with the other engine, if necessary.