Difference between revisions of "User:Onetoughcreampuff"

From Space Station 13 Wiki
Jump to navigation Jump to search
m (adding page for later)
Line 1: Line 1:
I try to make things sometimes.
I try to make things sometimes.
===Links to things that I'll forget and need at some point===
*[[Chemicals]]
*[[Foods_and_Drinks]]
*[[Guide_to_Botany]]
*[[Rancher]]
*[[Doctoring]]
*[[Roboticist]]
*[[Guide_to_Genetics#Mutations]]
*[[Artifact_Research#Running_gptio]]
*[[Antagonist#Current_Antagonists]]
*[[Syndicate_Items#So_many_toys,_so_little_time]]
*[[Being_A_Better_Traitor]]
*[[Guide_to_Mining#Ores]]
*[[Quartermaster#Items_you_can_order]]
*[[Construction]]
*[[MechComp#Your_(Metaphorical)_Toolbox]]
*[[Hacking#Wires]]
*[[Ore_Processing#So_where_do_I_get_all_the_stuff_I_need?]]
[[Image:CommunicationsComputer.png]] [[Image:CloningConsole.png]] [[Image:DNAConsole.png]] [[Image:SupplyRequestConsole.png]] [[Image:QuartermastersConsole.png]]
Intended for computers built from a single circuit board. Console frames don't accept mainboards and peripheral cards. If there're other machines associated with the console, e.g. cloning pod and scanner or portal ring and generator, build/deploy those first. If you build the computer first, then the accessory machines, you'll have to disconnect and reconnect the monitor with a screwdriver to get the console to recognize them.
<tabs>
<tab name="Making">
You will need:
* [[Image:metalSheetsSteel.png]] 5 [[Engineering Objects#Metal Sheets|metal sheets]]
* [[Image:glassSheets.png]] 2 [[Engineering Objects#Glass Sheets|glass sheets]]
* [[Image:wire.png]] A [[Engineering Objects#Wire|cable coil]]
* [[Image:WrenchV2-32x32.png]] A [[Engineering Objects#Wrench|wrench]]
* [[Image:ScrewdriverV3-32x32.png]] A [[Engineering Objects#Screwdriver|screwdriver]]
* One [[Computers#Normal computers|circuit board]]
To make:
# Click on the metal and choose ''Console frame''.
# Wrench the frame into place.
# Insert the circuit board.
# Use the screwdriver.
# Add wires.
# Use the glass on the frame.
# Connect the monitor with the screwdriver.
</tab>
<tab name="Breaking">
You will need:
* [[Image:ScrewdriverV3-32x32.png]] A [[screwdriver]]
* [[Image:CrowbarV2-32x32.png]] [[File:CrowbarRed-32x32.png]] A [[crowbar]]
* [[Image:WirecuttersV2-32x32.png]] [[Wirecutters]]
* [[Image:WrenchV2-32x32.png]] A [[wrench]]
* [[Image:WelderV2-32x32.gif]] A [[welder]]
To break:
# Screwdriver
# Crowbar
# Wirecutters
# Screwdriver
# Crowbar (removes circuit board)
# Wrench
# Welder
</tab>
</tabs>
====Terminal====
[[Image:ComputerTerminal.png]]
Useful for computers built from components and peripherals. Wired computers (as in part of a network) will need to be positioned over a [[Computers#Data Terminal|data terminal]] (deployable with the help of a [[mechanic]]), which in turn has to be connected to the power grid.
<tabs>
<tab name="Making">
You will need:
* [[Image:metalSheetsSteel.png]] 3 [[Engineering Objects#Metal Sheets|metal sheets]]
* [[Image:glassSheets.png]] 1 [[Engineering Objects#Glass Sheets|glass sheets]]
* [[Image:wire.png]] 5 lengths of [[Engineering Objects#Wire|cable]]
* [[Image:WrenchV2-32x32.png]] A [[Engineering Objects#Wrench|wrench]]
* [[Image:ScrewdriverV3-32x32.png]] A [[Engineering Objects#Screwdriver|screwdriver]]
* A computer mainboard
* Up to 2 [[ThinkDOS#Peripherals|peripheral cards]] (An ID scanner module is pretty much mandatory.)
* A storage drive
To make:
# Click on the metal and choose choose ''Computer terminal frame''.
# Wrench the frame into place.
# Insert the computer mainboard.
# Use the screwdriver.
# Insert the peripheral cards (up to 2).
# Add wires.
# Insert the storage drive.
# Use the glass on the frame.
# Connect the monitor with the screwdriver.
</tab>
<tab name="Breaking">
You will need:
* [[Image:ScrewdriverV3-32x32.png]] A [[screwdriver]]
* [[Image:CrowbarV2-32x32.png]] [[File:CrowbarRed-32x32.png]] A [[crowbar]]
* [[Image:WirecuttersV2-32x32.png]] [[Wirecutters]]
* [[Image:WrenchV2-32x32.png]] A [[wrench]]
* [[Image:WelderV2-32x32.gif]] A [[welder]]
To break:
# Screwdriver
# Crowbar
# Crowbar (removes hard drive)
# Wirecutters
# Crowbar (removes all modules)
# Screwdriver
# Crowbar (removes motherboard)
# Wrench
# Welder
</tab>
</tabs>
====Heavy====
[[Image:GenericComputer.png]]
Some of the components are slightly different, but the construction plan is otherwise the same.
<tabs>
<tab name="Making">
You will need:
* [[Image:metalSheetsSteel.png]] 5 [[Engineering Objects#Metal Sheets|metal sheets]]
* [[Image:glassSheets.png]] 2 [[Engineering Objects#Glass Sheets|glass sheets]]
* [[Image:wire.png]] 5 lengths of [[Engineering Objects#Wire|cable]]
* [[Image:WrenchV2-32x32.png]] A [[wrench]]
* [[Image:ScrewdriverV3-32x32.png]] A [[screwdriver]]
* A computer mainboard
* Up to 3 [[ThinkDOS#Peripherals|peripheral cards]] (An ID scanner module is pretty much mandatory.)
* A storage drive
To make:
# Click on the metal and choose choose ''Computer frame''.
# Wrench the frame into place.
# Insert the computer mainboard.
# Use the screwdriver.
# Insert the peripheral cards (up to 3).
# Add wires.
# Insert the storage drive.
# Use the glass on the frame.
# Connect the monitor with the screwdriver.
</tab>
<tab name="Breaking">
You will need:
* [[Image:ScrewdriverV3-32x32.png]] A [[screwdriver]]
* [[Image:CrowbarV2-32x32.png]] [[File:CrowbarRed-32x32.png]] A [[crowbar]]
* [[Image:WirecuttersV2-32x32.png]] [[Wirecutters]]
* [[Image:WrenchV2-32x32.png]] A [[wrench]]
* [[Image:WelderV2-32x32.gif]] A [[welder]]
To break:
# Screwdriver
# Crowbar
# Crowbar (removes hard drive)
# Wirecutters
# Crowbar (removes all modules)
# Screwdriver
# Crowbar (removes motherboard)
# Wrench
# Welder
</tab>
</tabs>
====Reinforced Walls====
<tabs>
<tab name="Making It Old School">
This only works with metal sheets.
You will need:
* [[Image:metalSheetsSteel.png]] Four sheets of [[Engineering Objects#Metal Sheets|metal]]
* [[Image:steelRods.gif]] Two [[Engineering Objects#Rods|rods]]
To make:
# Click on the metal while you're holding it.
# Choose ''Wall Girders''.
# Reinforce the metal sheets by clicking on the metal sheets with the rods in your hand.
# Reinforce two sheets.
# Pick up and stack the reinforced metal sheets and then click on the girder to reinforce it.
# Use the remaining reinforced metal sheets to add the plating.
</tab>
<tab name="Making It New School">
You will need:
* [[Image:glassSheets.png]] [[Image:metalSheetsSteel.png]] Four sheets of metal or crystal ([[Engineering Objects#Metal Sheets|metal]] is most frequent, but [[Engineering Objects#Glass Sheets|glass]] works too)
* [[Image:steelRods.gif]] Two [[Engineering Objects#Rods|rods]]
To make:
# Click on any tile while you're holding the sheets to build a girder.
# Reinforce the sheets by clicking on the sheets with the rods in your hand. Reinforce two sheets.
# Pick up and stack the reinforced sheets and then click on the girder to reinforce it.
# Use the remaining reinforced sheets to add the plating.
</tab>
<tab name="Breaking It Any School>
You will need:
* [[Image:ScrewdriverV3-32x32.png]] A [[screwdriver]]
* [[Image:WrenchV2-32x32.png]] A [[wrench]]
* [[Image:WelderV2-32x32.gif]] A [[welder]]
* [[Image:CrowbarV2-32x32.png]] [[File:CrowbarRed-32x32.png]] A [[crowbar]]
* [[Image:WirecuttersV2-32x32.png]] [[Wirecutters]]
To break:
# Wirecutters
# Screwdriver
# Welder
# Crowbar
# Wrench
# Welder
# Crowbar
# Screwdriver
# Wirecutters
# Wrench
</tab>
</tabs>
===Surgical removal===
{| style="font-size: 85%;" class="wikitable sortable"
|-
! -ectomy
! class="unsortable" | Scenario
! class="unsortable" | Tools
! class="unsortable" | Procedure
! class="unsortable" | Considerations
|- id="Headspider"
! Headspider
| The patient fought a [[Changeling|changeling]] and ended up being infected by its headspider.
| <center>[[File:Scalpel.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scalpel'''.
| Time is of the essence! This should cut a "strange tumor" out – if it doesn't after repeated attempts, the transformation has already been completed.
|- id="Implant"
! Implant
| The patient has an [[Implants|implant]] that requires removal.
| <center>[[File:Scalpel.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scalpel'''.
| Gives a paper wad containing the removed implant. Most of the time, the implant can be recycled by loading it into an empty implanter. However, some implants cannot be recovered by surgery, such as [[Syndicate Items#Mindslave Implant|mindslave implants]].
|- id="Bullets, shrapnel"
! Bullets, shrapnel
| The patient has bullets and/or [[Murder#Pipe bomb|shrapnel]] in their chest and cannot bear the random stuns and brute damage. Scan them with a health analyzer ("Foreign objects detected") to confirm your suspicion.
| <center>[[File:Scalpel.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scalpel'''.
| One foreign object is removed at a time, so you may need to repeat.
|- id="Limb"
! Limb
| The patient is a healthy human with four limbs. For augmentation or other reasons, some of the limbs have to go.
| <center>[[File:Scalpel.png]] [[File:CircSaw.png]]</center>
| Target the limb in question. Use the '''scalpel,''' then '''saw''', then '''scalpel'''.
| Even if you neglect to do the final step, the half-cut limb will still fall off after some time. This procedure will inflict a lot of tissue damage and will put the patient in critical condition very quickly, so you ''need'' to have bandages and medical drugs at the ready.
|- id="Butt"
! Butt
| The patient is alive or dead, and you need their behind for a [[Robots#Buttbot|buttbot]], a [[General Objects#Chair|farty chair]] or the [[Foods and Drinks#Main course|kitchen]].
| <center>[[File:Scalpel.png]] [[File:CircSaw.png]]</center>
| Target the chest with {{Harm}} intent. Use the '''scalpel,''' then '''saw''', then '''scalpel''',  then '''saw'''.
|
|- id="Eyeball"
! Eyeball
| You need to remove somebody's eyes, presumably for augmentation.
| <center>[[File:SurgicalSpoon.png]] [[File:Scalpel.png]]</center>
| Target the head. Use the '''spoon''', then '''scalpel''', then '''spoon''' using the hand of the side in question.
| Hold the surgery tools in your left hand to target the left eye, and vice versa.
|- id="Brain Humanoid Corpse"
! Brain (Humanoid Corpse)
| Your patient is quite dead, or wishes to be a [[Cyborg|cyborg]], and you need their brain.
| <center>[[File:Scalpel.png]] [[File:CircSaw.png]]</center>
| Remove the patient's headgear (hat, mask). Target the head with {{Help}} intent. Use the '''scalpel,''' then '''saw''', then '''scalpel''',  then '''saw'''.
| You can use the same procedure (headgear removal not necessary) on severed heads.
|- id="Brain Critter Corpse"
! Brain ([[Critter]] Corpse)
| Your patient has, through [[Admin|special]] [[Wizard|wizardry]], been turned into an animal, and now is quite dead, or wishes to be a [[Cyborg|cyborg]], and you need their brain.
| <center>[[File:Scalpel.png]]</center>
| Use the '''scalpel''' twice.
| No operating table necessary.
|- id="Head"
! Head
| Your wish to sever your patient's head for...science?
| <center>[[File:Scalpel.png]] [[File:CircSaw.png]]</center>
| Remove the patient's headgear (hat, mask). Target the head with {{Harm}} intent. Use the '''scalpel,''' then '''saw''', then '''scalpel''',  then '''saw'''.
|
|- id="Skull"
! Skull
| The patient is dead and you [[Robots#Skullbot|for]] [[Construction#Skull mask|some reason]] require their skull.
| <center>[[File:Scalpel.png]] [[File:CircSaw.png]]</center>
| After removing their brain (see above), target the head. Use the '''scalpel,''' then '''saw'''.
| You can use the same procedure on severed heads.
|- id="Heart"
! Heart
| Your patient has a heart and needs it removed or replaced (See possible [[Roboticist#Heart|replacement hearts]]).
| <center>[[File:Scalpel.png]] [[File:CircSaw.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scalpel,''' then '''saw''', then '''scalpel''',  then '''saw'''.
| Foreign objects will be removed first, so you may have to cut several times. The patient [[Doctoring#Cardiac abscondment|won't survive long]] without a heart. Cardiac stimulants are essential for any successful transplant, but removing a heart will also transfer all the reagents from the patient's system into the heart, so you'll need to top off on those stimulants after removal.
|- id="Lung"
! Lung
| Your patient has a lung and needs it removed or replaced.
| <center>[[File:Surgical_Scissors.png]] [[File:CircSaw.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scissors,''' then '''saw''', then '''scissors''' using the hand of the side in question.
| Whether you remove the right or left lung depends on the hand in which you do the final cut with the scissors. Naturally, the patient is less able to breathe if a lung is missing, moreso if both are, so [[#Salbutamol|salbutamol]] and the like are useful for counteracting the suffocation.
|- id="Kidney"
! Kidney
| Your patient has a kidney and needs it removed or replaced.
| <center>[[File:Scalpel.png]] [[File:Surgical_Scissors.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scalpel,''' then '''scalpel''', then '''scissors''' using the hand of the side in question.
| Whether you remove the right or left kidney depends on the hand in which you do the final cut with the scissors.
|- id="Appendix"
! Appendix
| Your patient has an appendix and needs it removed or replaced.
| <center>[[File:Surgical_Scissors.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scissors''' three times.
|
|- id="Liver"
! Liver
| Your patient has a liver and needs it removed or replaced.
| <center>[[File:Surgical_Scissors.png]] [[File:Scalpel.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scissors,''' then '''scissors''', then '''scalpel'''.
|
|- id="Stomach"
! Stomach
| Your patient has a stomach and needs it removed or replaced.
| <center>[[File:Surgical_Scissors.png]] [[File:Scalpel.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scissors,''' then '''scalpel''', then '''scissors'''.
|
|- id="Intestines"
! Intestines
| Your patient has intestines and needs them removed or replaced.
| <center>[[File:Surgical_Scissors.png]] [[File:Scalpel.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scissors,''' then '''scalpel''', then '''scalpel'''.
|
|- id="Pancreas"
! Pancreas
| Your patient has a pancreas and needs it removed or replaced.
| <center>[[File:Scalpel.png]] [[File:Surgical_Scissors.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scalpel,''' then '''scissors''', then '''scissors'''.
|
|- id="Spleen"
! Spleen
| Your patient has a spleen and needs it removed or replaced.
| <center>[[File:Scalpel.png]] [[File:Surgical_Scissors.png]]</center>
| Target the chest with {{Help}} intent. Use the '''scalpel,''' then '''scissors''', then '''scalpel'''.
|
|- id="Tail"
! Tail
| Your patient has some form of tail and needs it removed or replaced.
| <center>[[File:Scalpel.png]] [[File:CircSaw.png]]</center>
| Target the chest with {{Help}} intent. Use the '''saw,''' then '''scalpel''', then '''saw'''.
| If your patient happens to be a skeleton, you can use a crowbar to remove their tail instead.
|- id="Chest Item Removal"
! Chest Item
| Your patient is tired of keeping a [[Template:Objects|terrible secret]] inside them and wants it removed/replaced.
| <center>[[File:Scalpel.png]]</center>
| Target the chest with {{Grab}} intent. Use the '''scalpel,''' then use an empty hand with {{Help}} intent to yank the item out.
|
|}


=== work in progress stuff ===
=== work in progress stuff ===

Revision as of 01:48, 5 May 2021

I try to make things sometimes.

Links to things that I'll forget and need at some point

CommunicationsComputer.png CloningConsole.png DNAConsole.png SupplyRequestConsole.png QuartermastersConsole.png

Intended for computers built from a single circuit board. Console frames don't accept mainboards and peripheral cards. If there're other machines associated with the console, e.g. cloning pod and scanner or portal ring and generator, build/deploy those first. If you build the computer first, then the accessory machines, you'll have to disconnect and reconnect the monitor with a screwdriver to get the console to recognize them.

You will need:

To make:

  1. Click on the metal and choose Console frame.
  2. Wrench the frame into place.
  3. Insert the circuit board.
  4. Use the screwdriver.
  5. Add wires.
  6. Use the glass on the frame.
  7. Connect the monitor with the screwdriver.

You will need:

To break:

  1. Screwdriver
  2. Crowbar
  3. Wirecutters
  4. Screwdriver
  5. Crowbar (removes circuit board)
  6. Wrench
  7. Welder

Terminal

ComputerTerminal.png

Useful for computers built from components and peripherals. Wired computers (as in part of a network) will need to be positioned over a data terminal (deployable with the help of a mechanic), which in turn has to be connected to the power grid.

You will need:

To make:

  1. Click on the metal and choose choose Computer terminal frame.
  2. Wrench the frame into place.
  3. Insert the computer mainboard.
  4. Use the screwdriver.
  5. Insert the peripheral cards (up to 2).
  6. Add wires.
  7. Insert the storage drive.
  8. Use the glass on the frame.
  9. Connect the monitor with the screwdriver.

You will need:

To break:

  1. Screwdriver
  2. Crowbar
  3. Crowbar (removes hard drive)
  4. Wirecutters
  5. Crowbar (removes all modules)
  6. Screwdriver
  7. Crowbar (removes motherboard)
  8. Wrench
  9. Welder

Heavy

GenericComputer.png

Some of the components are slightly different, but the construction plan is otherwise the same.

You will need:

To make:

  1. Click on the metal and choose choose Computer frame.
  2. Wrench the frame into place.
  3. Insert the computer mainboard.
  4. Use the screwdriver.
  5. Insert the peripheral cards (up to 3).
  6. Add wires.
  7. Insert the storage drive.
  8. Use the glass on the frame.
  9. Connect the monitor with the screwdriver.

You will need:

To break:

  1. Screwdriver
  2. Crowbar
  3. Crowbar (removes hard drive)
  4. Wirecutters
  5. Crowbar (removes all modules)
  6. Screwdriver
  7. Crowbar (removes motherboard)
  8. Wrench
  9. Welder

Reinforced Walls

This only works with metal sheets.

You will need:

To make:

  1. Click on the metal while you're holding it.
  2. Choose Wall Girders.
  3. Reinforce the metal sheets by clicking on the metal sheets with the rods in your hand.
  4. Reinforce two sheets.
  5. Pick up and stack the reinforced metal sheets and then click on the girder to reinforce it.
  6. Use the remaining reinforced metal sheets to add the plating.

You will need:

  • GlassSheets.png MetalSheetsSteel.png Four sheets of metal or crystal (metal is most frequent, but glass works too)
  • SteelRods.gif Two rods

To make:

  1. Click on any tile while you're holding the sheets to build a girder.
  2. Reinforce the sheets by clicking on the sheets with the rods in your hand. Reinforce two sheets.
  3. Pick up and stack the reinforced sheets and then click on the girder to reinforce it.
  4. Use the remaining reinforced sheets to add the plating.

You will need:

To break:

  1. Wirecutters
  2. Screwdriver
  3. Welder
  4. Crowbar
  5. Wrench
  6. Welder
  7. Crowbar
  8. Screwdriver
  9. Wirecutters
  10. Wrench

Surgical removal

-ectomy Scenario Tools Procedure Considerations
Headspider The patient fought a changeling and ended up being infected by its headspider.
Scalpel.png
Target the chest with Help intent. Use the scalpel. Time is of the essence! This should cut a "strange tumor" out – if it doesn't after repeated attempts, the transformation has already been completed.
Implant The patient has an implant that requires removal.
Scalpel.png
Target the chest with Help intent. Use the scalpel. Gives a paper wad containing the removed implant. Most of the time, the implant can be recycled by loading it into an empty implanter. However, some implants cannot be recovered by surgery, such as mindslave implants.
Bullets, shrapnel The patient has bullets and/or shrapnel in their chest and cannot bear the random stuns and brute damage. Scan them with a health analyzer ("Foreign objects detected") to confirm your suspicion.
Scalpel.png
Target the chest with Help intent. Use the scalpel. One foreign object is removed at a time, so you may need to repeat.
Limb The patient is a healthy human with four limbs. For augmentation or other reasons, some of the limbs have to go.
Scalpel.png CircSaw.png
Target the limb in question. Use the scalpel, then saw, then scalpel. Even if you neglect to do the final step, the half-cut limb will still fall off after some time. This procedure will inflict a lot of tissue damage and will put the patient in critical condition very quickly, so you need to have bandages and medical drugs at the ready.
Butt The patient is alive or dead, and you need their behind for a buttbot, a farty chair or the kitchen.
Scalpel.png CircSaw.png
Target the chest with Harm intent. Use the scalpel, then saw, then scalpel, then saw.
Eyeball You need to remove somebody's eyes, presumably for augmentation.
SurgicalSpoon.png Scalpel.png
Target the head. Use the spoon, then scalpel, then spoon using the hand of the side in question. Hold the surgery tools in your left hand to target the left eye, and vice versa.
Brain (Humanoid Corpse) Your patient is quite dead, or wishes to be a cyborg, and you need their brain.
Scalpel.png CircSaw.png
Remove the patient's headgear (hat, mask). Target the head with Help intent. Use the scalpel, then saw, then scalpel, then saw. You can use the same procedure (headgear removal not necessary) on severed heads.
Brain (Critter Corpse) Your patient has, through special wizardry, been turned into an animal, and now is quite dead, or wishes to be a cyborg, and you need their brain.
Scalpel.png
Use the scalpel twice. No operating table necessary.
Skull The patient is dead and you for some reason require their skull.
Scalpel.png CircSaw.png
After removing their brain (see above), target the head. Use the scalpel, then saw. You can use the same procedure on severed heads.
Heart Your patient has a heart and needs it removed or replaced (See possible replacement hearts).
Scalpel.png CircSaw.png
Target the chest with Help intent. Use the scalpel, then saw, then scalpel, then saw. Foreign objects will be removed first, so you may have to cut several times. The patient won't survive long without a heart. Cardiac stimulants are essential for any successful transplant, but removing a heart will also transfer all the reagents from the patient's system into the heart, so you'll need to top off on those stimulants after removal.
Lung Your patient has a lung and needs it removed or replaced.
Surgical Scissors.png CircSaw.png
Target the chest with Help intent. Use the scissors, then saw, then scissors using the hand of the side in question. Whether you remove the right or left lung depends on the hand in which you do the final cut with the scissors. Naturally, the patient is less able to breathe if a lung is missing, moreso if both are, so salbutamol and the like are useful for counteracting the suffocation.
Kidney Your patient has a kidney and needs it removed or replaced.
Scalpel.png Surgical Scissors.png
Target the chest with Help intent. Use the scalpel, then scalpel, then scissors using the hand of the side in question. Whether you remove the right or left kidney depends on the hand in which you do the final cut with the scissors.
Appendix Your patient has an appendix and needs it removed or replaced.
Surgical Scissors.png
Target the chest with Help intent. Use the scissors three times.
Liver Your patient has a liver and needs it removed or replaced.
Surgical Scissors.png Scalpel.png
Target the chest with Help intent. Use the scissors, then scissors, then scalpel.
Stomach Your patient has a stomach and needs it removed or replaced.
Surgical Scissors.png Scalpel.png
Target the chest with Help intent. Use the scissors, then scalpel, then scissors.
Intestines Your patient has intestines and needs them removed or replaced.
Surgical Scissors.png Scalpel.png
Target the chest with Help intent. Use the scissors, then scalpel, then scalpel.
Pancreas Your patient has a pancreas and needs it removed or replaced.
Scalpel.png Surgical Scissors.png
Target the chest with Help intent. Use the scalpel, then scissors, then scissors.
Spleen Your patient has a spleen and needs it removed or replaced.
Scalpel.png Surgical Scissors.png
Target the chest with Help intent. Use the scalpel, then scissors, then scalpel.
Tail Your patient has some form of tail and needs it removed or replaced.
Scalpel.png CircSaw.png
Target the chest with Help intent. Use the saw, then scalpel, then saw. If your patient happens to be a skeleton, you can use a crowbar to remove their tail instead.
Chest Item Your patient is tired of keeping a terrible secret inside them and wants it removed/replaced.
Scalpel.png
Target the chest with Grab intent. Use the scalpel, then use an empty hand with Help intent to yank the item out.

work in progress stuff