Difference between revisions of "Robots"
Katznelson (talk | contribs) |
Katznelson (talk | contribs) |
||
Line 99: | Line 99: | ||
= PR-6S GuardBuddy = | = PR-6S GuardBuddy = | ||
A variant of the PR-6 Robuddy. Utilizes the DWAINE Networking to conduct operations around the station. There are several models of this wonderful little robot running around. | A variant of the PR-6 Robuddy. Utilizes the DWAINE Networking to conduct operations around the station. There are several models of this wonderful little robot running around. To properly use them one must manually enter commands via the DWAINE terminals in Research. However due to their uncompromising nature, they will follow orders to the last letter. This makes them a perfect tool for traitors to incapacitate the whole station with their non-lethal but efficient purge directives. | ||
GuardBuddy - Baseline model. | GuardBuddy - Baseline model. Often seen guarding Research or patrolling the station. Makes a perfect guard. | ||
SecBuddy - An early sub-model of the popular PR-6S Guardbuddy line. | SecBuddy - An early sub-model of the popular PR-6S Guardbuddy line. In active service in various outposts. | ||
Wardbuddy - Equipped with a Syring Gun. | Wardbuddy - Equipped with a Syring Gun. | ||
GunBuddy - Equipped with a | GunBuddy - Equipped with a Taser gun. | ||
SmokeBuddy - Equipped with the "Smoker Tool". | SmokeBuddy - Equipped with the "Smoker Tool". | ||
Ol' Harner- Dispenses the Law with a cool hat. | Ol' Harner- Dispenses the Law with a cool hat. |
Revision as of 05:47, 7 October 2012
Robots are NPC mechanicals that do various tasks automatically. They are mostly the work of the Roboticist, though anyone can use them by simply bringing them to a place they're needed. They can be constructed manually through the right combination of parts or automatically from the Robotics fabricator. The Quartermaster's Robotics Crate also contains one of each type of drone.
Medbot
The most commonly seen robot. Medbots will, most often, detect people nearby and inject them with helpful drugs to swiftly bring them back to health. They are generally faster and more competent than your average Medical Doctor. If given a choice between bringing an unconscious person to an MD or a medbot...go with the medbot.
Medbots may be unlocked by anyone with a research ID and given a beaker to inject instead of helpful drugs. Traitor or jackass research staff will occasionally put a big beaker of poison in the medbot to make it kill its patients. When emagged, the medbot will enthusiastically inject everyone possible with massive amounts of poison.
Medbots may be produced outright at a Robotics Fabricator (found only in robotics), and they may also be assembled using the following procedure:
Materials
- 1 empty medkit (any color)
- 1 Proximity Sensor
- 1 cyborg arm (left or right)
- 1 Health Analyzer
Procedure
- Use the cyborg arm on the empty medkit.
- Use the health analyzer on the resulting assembly.
- Use the proximity sensor to finish the robot.
Optionally, you may use a pen after you attach the arm or the analyzer to rename the finished robot.
Floorbot
File:Floorbot.png
Floorbots will detect nearby areas of space and tirelessly use their supply of floor tiles to turn it into walkable floors. They are most commonly used to fix holes in the station from bomb explosions. They have a limited number of tiles, but can be refilled by anyone. They hold a max of 50 tiles.
When emagged, Floorbots will RIP UP floors equally as tirelessly, quickly turning habitable parts of a station into cold, airless tombs.
Floorbots may be produced outright at a Robotics Fabricator (where they will spawn with 10 tiles), and may also be assembled with the following procedure:
Materials
- 1 empty mechanical toolbox (blue)
- 1 Proximity Sensor
- 1 cyborg arm (left or right)
- 1+ floor tile (can be any number, most efficient if 1)
Procedure
- Use the floor tile on the empty toolbox.
- Use the cyborg arm on the resulting assembly.
- Use the proximity sensor to finish the robot.
Note: If you use more than 10 floor tiles, the finished floorbot will have however many you put in. If you use less than 10, the floorbot will have 10. Therefore, it is most efficient to use 1-2 in creation and load the rest after the floorbot is done.
Firebot
Firebots will detect nearby fires, whether on tiles or on people, and put them out. They are commonly used to breach areas that are consumed in flames, where there is a serious risk of a flash-over that could kill the firefighters. One also spawns in the chemistry lab, where people routinely set them selves ablaze. They tend to fight fires very slowly. If a fire is in a critical area such as escape, human firefighters are best.
When emagged, Firebots will ram anyone nearby, knocking them down with surprising efficiency.
Firebots may be produced outright at a Robotics Fabricator, and may also be assembled with the following procedure:
Materials
- 1 empty emergency toolbox (red)
- 1 Proximity Sensor
- 1 cyborg arm (left or right)
- 1 Fire Extinguisher (almost always found in the emergency toolbox)
Procedure
- Use the cyborg arm on the toolbox.
- Use the fire extinguisher on the resulting assembly.
- Use the proximity sensor to finish the robot.
Cleanbot
File:Cleanbot.png
Cleanbots will clean the floor around them automatically. They do so without leaving the floor wet, the way the Janitor does. They are most commonly used when a Janitor is not on the station. They are also seen when the Janitor is a lazy nincompoop who is more interested in tripping people than cleaning messes. A Cleanbot is best used in areas where messes are routinely made, instead of a place where a lot of messes are made at once. A Cleanbot makes a lot of sense in the bar, where people will puke pretty much constantly. A cleanbot does not make sense to clean up the aftermath of a gibbing, which will take the poor little bot the better part of 10 minutes.
When emagged, Cleanbots will wet as many nearby floors as they can, basically bringing it in line with what the Janitor does anyway.
Cleanbots may be produced outright at a Robotics Fabricator, and may also be assembled with the following procedure:
Materials
- 1 bucket (blue)
- 1 Proximity Sensor
- 1 cyborg arm (left or right)
Procedure
- Use the sensor on the bucket.
- Use the cyborg arm on the resulting assembly.
Securitron
Securitrons network into the station's security computer, identify criminals, and arrest them. Arrest, in this case, means liberal application of a stun baton and subsequent application of handcuffs. Securitrons will also arrest anyone aside from security or command who is holding a weapon, but their concept of a weapon is very limited. A securitron named "Officer Beepsky" spawns in personal quarters just north of the bridge.
Securitrons may be unlocked by anyone with a Security ID and set to stay where they are (guarding the room they're in), or patrol (where they move through the public parts of the station). They may also be told to enforce or ignore weapon policies, and to either arrest offenders (the above behavior) or detain them (stay with them and repeatedly stun them if they try to escape). When emagged, securitrons arrest everyone they see. By default they will not patrol.
Securitrons may be produced outright at a Robotics Fabricator, and may also be assembled with the following procedure:
Materials
- 1 Remote Signaling Device
- 1 Security Helmet (the protective ones)
- 1 cyborg arm (left or right)
- 1 Proximity Sensor
- 1 stun baton
Procedure
- Use a screwdriver on a Remote Signaling Device.
- Add a Helmet.
- Weld them together with a welder.
- Add a Proximity Sensor and a Robot Arm.
- Finally, add a Stun Baton.
PR-6S GuardBuddy
A variant of the PR-6 Robuddy. Utilizes the DWAINE Networking to conduct operations around the station. There are several models of this wonderful little robot running around. To properly use them one must manually enter commands via the DWAINE terminals in Research. However due to their uncompromising nature, they will follow orders to the last letter. This makes them a perfect tool for traitors to incapacitate the whole station with their non-lethal but efficient purge directives.
GuardBuddy - Baseline model. Often seen guarding Research or patrolling the station. Makes a perfect guard.
SecBuddy - An early sub-model of the popular PR-6S Guardbuddy line. In active service in various outposts.
Wardbuddy - Equipped with a Syring Gun.
GunBuddy - Equipped with a Taser gun.
SmokeBuddy - Equipped with the "Smoker Tool".
Ol' Harner- Dispenses the Law with a cool hat.
El Vaquero- Fabricado en México.
PR-4 Robuddy - A very old model.
Procedure
- Find a GuardBuddy Frame.
- Insert GuardBuddy Motherboard.
- Insert desired Tool Module.
- Place Robot Arm (Left or right).
- Insert Power Cell.
Buttbot
Buttbots...should be seen instead of explained. They can only be assembled.
Procedure
- Put a cyborg arm (left or right) onto a butt.
Amusing Duck
Amusing Ducks will slowly move around at random, quacking and emitting a playful jingle. They will occasionally lay easter eggs, which in turn produce some of the most fun items in the game.
When emagged, they lay eggs more often but will also quack and play chords more often, but will do so on dissonant chords, giving them a distinctly 'wrong' and slightly unsettling sound. They can be colossally annoying when a lot of them are stacked into a small area and can easily inspire some to violence to make the quacking stop.
They can only be assembled.
Procedure
- Put a cyborg arm (left or right) onto a horn.