Difference between revisions of "Fixing the Paint Machine"

From Space Station 13 Wiki
Jump to navigation Jump to search
(More details about the repair messages, explain the random chance to accidentally destroy the machine at the end, note how mechanics works with it)
Line 18: Line 18:
# Make sure you have all the tools.
# Make sure you have all the tools.
# Haul them all to the paint machine.
# Haul them all to the paint machine.
# Use the screwdriver
# Use the screwdriver on the machine to unscrew the maintenance panel.
# Use the crowbar (You will get a floor tile called "maintenance panel". '''DON'T LOSE IT. YOU WILL NEED IT LATER.'''
# Use the crowbar on the machine to pry the said panel away. You will get a floor tile called "maintenance panel". '''DON'T LOSE IT. YOU WILL NEED IT LATER.'''
# Use the wrench
# Use the wrench on the machine to loosen the service module.
# Use the cable coils
# Use the cable coils on the machine to replace the wires.
# Use all of the paint in the crate that you got
# Use all of the paint on the machine to refill the paint cartridges.
# Use the wrench
# Use the wrench on the machine to secure the module.
# Use the maintenance panel
# Use the maintenance panel on the machine.
# Use the screwdriver
# Use the screwdriver to secure the machine. Depending on your luck, you may successfully repair the machine or, far more likely, destroy it, causing it to disappearing in a harmless explosion and rendering your progress moot.
 
#*Luckily, you can [[Mechanic#The Device Analyzer|scan the paint machine with mechanics]]. The deployed machine will be as same as it was before you tried to fix the thing, so you'll have to repeat all these steps again, but at least you have a second chance.


==Paintin' thing==
==Paintin' thing==

Revision as of 17:05, 27 October 2019

MechanicNew64.png This page is under construction.
The following information may be incomplete.
It could use a "few" adjustments.


You've probably seen it a couple times, either somewhere in maintenance or elsewhere in all its roundstart broken glory. And you'd like to get some paint for whatever reason. Either way, you wanna know how since you've came to this guide.


Getting the tools for the job

Of course, you're gonna need some tools and you should know where to get them.

You're gonna need...


Actually repairing the thing.

  1. Make sure you have all the tools.
  2. Haul them all to the paint machine.
  3. Use the screwdriver on the machine to unscrew the maintenance panel.
  4. Use the crowbar on the machine to pry the said panel away. You will get a floor tile called "maintenance panel". DON'T LOSE IT. YOU WILL NEED IT LATER.
  5. Use the wrench on the machine to loosen the service module.
  6. Use the cable coils on the machine to replace the wires.
  7. Use all of the paint on the machine to refill the paint cartridges.
  8. Use the wrench on the machine to secure the module.
  9. Use the maintenance panel on the machine.
  10. Use the screwdriver to secure the machine. Depending on your luck, you may successfully repair the machine or, far more likely, destroy it, causing it to disappearing in a harmless explosion and rendering your progress moot.
    • Luckily, you can scan the paint machine with mechanics. The deployed machine will be as same as it was before you tried to fix the thing, so you'll have to repeat all these steps again, but at least you have a second chance.

Paintin' thing

If all went well and this guide isn't misleading, then the paint machine is now unbroken! Hooray! The paint machine has (hopefully) unlimited uses and can give you about any color of paint you desire.

  • You can remove colours from painted things by dispensing "blank" paint. (RGB: 0)
  • You can also use the paint machine to refill an empty can of paint.