User:Zamujasa/Station Network

From Space Station 13 Wiki
< User:Zamujasa
Revision as of 23:38, 16 June 2014 by Zamujasa (talk | contribs) (Adding a bunch more data, still a ton of work to do. If this is SUPER SECRET SHIT then please let me know so I don't waste any more time)
Jump to navigation Jump to search

I'd like to make this into a more detailed page at some point, but for now I'm just infodumping what I have.

Until then, here's a basic guide to abusing the station network:


Wired Network

TODO. Need to go into this more, explain what devices are on the network, etc etc.

Unlike the other page(s) that says there are several different station networks, everything is on one big network now. There are still separate ones out in space (like on Hemera VII and some telescience areas) though.

Things you can do!

  • Connect to the AI (MAINFRAME_AI) for a direct chat line! Only people who have an active packet sniffer will be able to see what you're doing (and the likelihood of that is exceedingly rare)
  • Connect to the communications array to download that security report you hear about at the start of rounds! It's useless but it might make a good hat if you print it out
  • Send out radio packets from the mainframe radio using only DWAINE! (The existing guide leaves out that you have to mkdir /mnt/radio/XXXX before you can pipe to that frequency)
  • And more! Stick a packet sniffer onto a data terminal somewhere and go nuts.


Types of networked devices

TODO


Creating packets

Packets can be created by using the following command:

echo field=value|nfield2=value2|nfield3=value3

To store the packet as a file on the mainframe:

echo ... ^ /home/pjones/filename

To send a file (like a packet!) to your terminal, so you can send it with file_send or print it with file_print, save the file to the /mnt/term directory:

cp /home/pjones/filename /mnt/term/x

If you just need to get the file right away, you can simply save the file in /mnt/term right away:

echo ... ^ /mnt/term/foo


Spoofing the login packet

Faking a login involves a few specific steps. You'll generally always need a valid ID of any kind to do the initial login, though.

  1. Log into the mainframe (insert your card and term_login)
  2. Craft a login packet
  3. Send the crafted packet back to your terminal
  4. Either enter su for admin rights, or disconnect and reconnect to log in as a completely different user
  5. Instead of using term_login, use file_send to send the packet you saved earlier
  6. You are now logged in with your forged user

The login packet looks like this:

  • registered=Pubbie Jones
  • assignment=Staff Assistant
  • access=, followed by a (semicolon? comma?)-separated list of rights -- every access in the ID computer has a different one. The important one for su access is 11

Applying all of the above to create the packet and register it for file_send:

echo registered=Pubbie Jones|nassignment=Hacker|naccess=11 ^ /mnt/term/loginpacket


Keep in mind that you shouldn't use this to set the Guardbuddies to purge or other destructive things unless you're a traitor!


Sending packets using the mainframe's radio

You can use DWAINE to send out packets over the air. The mainframe's radio has a limited range, though, so it won't reach everything.

  1. Create a directory for the frequency you want to transmit on. Directories are the four numbers without the decimal point, e.g. /mnt/radio/1149 for 114.9, by using the command mkdir /mnt/radio/1149
    • If the directory already exists for whatever reason, you can skip this step
  2. Craft your packet
    • Optional: Save it if you need to use it more than once. Otherwise, just use echo and pipe it directly.
  3. Copy or move your crafted packet to the folder you created, e.g. copy packet /mnt/radio/1149 or echo ... ^ /mnt/radio/1149/packet

If it worked, the packet you crafted should automatically be sent out by the radio. You can use the Packet Sniffer program on your PDA to confirm.


Radio Frequencies

Basically everything you can spoof (aside from PDA messages) will require a address_1 field, indicating the target of the message.

sender is added automatically to almost every packet-sending device, though apparently you can get away without one by manually crafting a signal and using a wireless computer's free mode (with greatly reduced range)

114.9 - PDAs

Packets:

  • TODO
  • Really easy to scan, the Network Tools cartridge defaults to this freqency
  • Snoop on people trying to use PDAs to covertly message people! Just be sure to get your ID switched to "NSA Operative" first Clear the log regularly so it doesn't clog up with PDA pings.

Packet spoofing:

  • address_1: Needed if you're targeting one PDA, otherwise it's a mass broadcast to every PDA
  • command: Generally text_message, though there are others (TODO)
  • message: The text you want to send. Surprise!
  • sender_name: What the name should show up as. Leaving it blank will make PDAs show it as !UNKNOWN! (or something close)
  • And more!

141.1 - Doors

Doors have a really short brodcast range (± 5 tiles?) so you'll have to be close to ping them. You can sniff packets if you click on a door (or someone else does), or just ping and try to pick the right one from the list.

Packet Sniffing details:

  • user_id: Person whose ID was used (e.g. pubbiejones)
  • door_status: State the door is in (e.g. open, closed)
  • lock_status: State of the door bolts (e.g. locked, unlocked)
  • tag: TBD?


Packet spoofing:

  • command: One of the following:
    • open: Opens a door
    • close: Closes a door
    • lock: Drops the door bolts
    • unlock: Raises the door bolts
    • secure_open: Bolts a door open*
    • secure_close: Bolts a door closed*

*Used by the cryptographic sequencer.


143.7 - Fire Alarms

Packet Sniffing:

  • zone: Fire alarm's location (e.g. Head of Research's Office)
  • type: Alert type (e.g. Fire)
  • netid: Fire alarm's network address?
  • alert: Alert type (e.g. fire, reset, maybe more?)