User:Vortex1942/Automating the TEG

This page is under construction. The following information may be incomplete.

Devices

Stuff that MechComp can interact with in engineering.

Pumps

Frequencies

Using a multitool on a WiFi capable device will tell you it's frequency

• Engineering: 122.5
• Science: 122.9

Commands

• NOTE: Omitting tag will cause commands to be sent to ALL pumps
• Power on
  • command: power_on
  • tag: (Pump Name)
• Power off
  • command: power_off
  • tag: (Pump Name)
• Set target pressure
  • NOTE: parameter has a max value of 5066.25kPa
  • tag: (Pump Name)
  • command: set_target_pressure
  • parameter: (Target Pressure)

• Broadcast status
  • command: broadcast_status

Pump Status

The following is transmited whenever a pump recieves are command

• tag: (Pump Name)
• device: AGP
• power: on or off
• target_output: (Target Pressure)
• address_tag: pumpcontrol

tag: (Pump Name)

: