User:Vortex1942/Automating the TEG

This page is under construction. The following information may be incomplete.

Wireless Devices

Frequencies

Most Atmos devices will use these frequencies, You're going to have to explore security to find the other frequency.

• Engineering: 122.5
• Science: 122.9

ExpandPumps

Pumps Powered down pumps do not transfer gas, Meaning they can be used as controllable Electronic Valves, Commands The following points demon WARNING: Omitting tag will cause commands to be sent to ALL pumps Power on command: power_on tag: (Pump Name) Power off command: power_off tag: (Pump Name) Set target pressure NOTE: parameter has a max value of 5066.25kPa tag: (Pump Name) command: set_target_pressure parameter: (Target Pressure) Broadcast status command: broadcast_status Pump Status The following is transmited whenever a pump recieves are command tag: (Pump Name) device: AGP power: on or off target_output: (Target Pressure) address_tag: pumpcontrol Packet Examples Purge Hotloop: tag=Hot Loop Purge Pump;command=power_on Check All Pumps: command=broadcast_status Set Pressure: tag=Hot Loop Purge Pump;command=set_target_pressure;parameter=5000

ExpandGas Mixers

Gas Mixers Did I hear you say "Adjustable combustion chamber temperatures?" Unfortunately I have not been able to tap into status reports from mixers Commands Toggle Power command: toggle_pump parameter: power_on or power_off tag: (Mixer Name) Set gas ratio NOTE: parameter value is Input 1 ratio only ie. 66 = 66:33 command: set_ratio parameter: (0-100 Number) tag: (Mixer Name) Set gas pressure NOTE: parameter is an uncapped value command: set_ratio parameter: (Target Air Pressure) tag: (Mixer Name) Packet Examples Set Ratio to 66:33: tag=engine_combust_control; command=set_ratio; parameter=66 Set Pressure to 75kPa: tag=engine_combust_control; command=set_pressure; parameter=75 Turn off mixer: tag=engine_combust_control; command=toggle_pump; parameter=power_off

MechComp Devices

Connecting the generator and pressure will require using you multitool on them and selecting "Connect Component"

ExpandThe Generator

The Generator Ever wanted to boast about the engine output to the crew? Well now you can do it automatically! Outputs power: (Unformatted power output) powerfmt: (Formatted power output, 2.21 GW) power=3.84698e+06&powerfmt=3.847 MW RegEx Example Output: power=3.84698e+06&powerfmt=3.847 MW Seperate powerfmt: (?<=&powerfmt=)[^&]+ = 3.847 MW

ExpandPressure Meter

Pressure Meter Ever wanted to boast about the engine output to the crew? Well now you can do it automatically! Outputs pressure: (Pipe Pressure) temperature: (Pipe temperature) RegEx Example Output: pressure=3410.27&temperature=20462.7 Seperate pressure as whole number: ([0-9]+) = 3410

ExpandCirculators

Circulators Inputs TODO! pressure: (Pipe Pressure) temperature: (Pipe temperature) RegEx Example Output: pressure=3410.27&temperature=20462.7 Seperate pressure as whole number: ([0-9]+) = 3410

Hot Loop Auto-purge

Tired of your hot loop pipes rupting and flooding engineering with plasma? Well this is for you!

TODO Explain this

Supplementary Video

---

tag: (Pump Name)

: