Difference between revisions of "User:Vortex1942/Automating the TEG"

Revision as of 13:37, 13 December 2023

This page is under construction.
The following information may be incomplete.

Most Atmos devices will use these frequencies, You're going to have to explore security to find the other frequency.

Pumps
Pumps Powered down pumps do not transfer gas, Meaning they can be used as controllable Electronic Valves, Commands The following points demon WARNING: Omitting `tag` will cause commands to be sent to ALL pumps Power on `command`: `power_on` `tag`: `(Pump Name)` Power off `command`: `power_off` `tag`: `(Pump Name)` Set target pressure NOTE: `parameter` has a max value of 5066.25kPa `tag`: `(Pump Name)` `command`: `set_target_pressure` `parameter`: `(Target Pressure)` Broadcast status `command`: `broadcast_status` Pump Status The following is transmited whenever a pump recieves are command `tag`: `(Pump Name)` `device`: `AGP` `power`: `on` or `off` `target_output`: `(Target Pressure)` `address_tag`: `pumpcontrol` Packet Examples Purge Hotloop: `tag=Hot Loop Purge Pump;command=power_on` Check All Pumps: `command=broadcast_status` Set Pressure: `tag=Hot Loop Purge Pump;command=set_target_pressure;parameter=5000`

Gas Mixers
Gas Mixers Did I hear you say "Adjustable combustion chamber temperatures?" Unfortunately I have not been able to tap into status reports from mixers Commands Toggle Power `command`: `toggle_pump` `parameter`: `power_on` or `power_off` `tag`: `(Mixer Name)` Set gas ratio NOTE: `parameter` value is Input 1 ratio only ie. 66 = 66:33 `command`: `set_ratio` `parameter`: `(0-100 Number)` `tag`: `(Mixer Name)` Set gas pressure NOTE: `parameter` is an uncapped value `command`: `set_ratio` `parameter`: `(Target Air Pressure)` `tag`: `(Mixer Name)` Packet Examples Set Ratio to 66:33: `tag=engine_combust_control; command=set_ratio; parameter=66` Set Pressure to 75kPa: `tag=engine_combust_control; command=set_pressure; parameter=75` Turn off mixer: `tag=engine_combust_control; command=toggle_pump; parameter=power_off`

Connecting the generator and pressure will require using you multitool on them and selecting "Connect Component"

The Generator
The Generator Ever wanted to boast about the engine output to the crew? Well now you can do it automatically! Outputs `power`: `(Unformatted power output)` `powerfmt`: `(Formatted power output, 2.21 GW)` power=3.84698e+06&powerfmt=3.847 MW RegEx Example Output: `power=3.84698e+06&powerfmt=3.847 MW` Seperate powerfmt: `(?<=&powerfmt=)[^&]+` = `3.847 MW`

Pressure Meter
Pressure Meter Ever wanted to boast about the engine output to the crew? Well now you can do it automatically! Outputs `pressure`: `(Pipe Pressure)` `temperature`: `(Pipe temperature)` RegEx Example Output: `pressure=3410.27&temperature=20462.7` Seperate pressure as whole number: `([0-9]+)` = `3410`

Circulators
Circulators Inputs TODO! `pressure`: `(Pipe Pressure)` `temperature`: `(Pipe temperature)` RegEx Example Output: `pressure=3410.27&temperature=20462.7` Seperate pressure as whole number: `([0-9]+)` = `3410`

Tired of your hot loop pipes rupting and flooding engineering with plasma? Well this is for you!

TODO Explain this

tag: (Pump Name)

:

@@ Line 161: / Line 161: @@
 Tired of your hot loop pipes rupting and flooding engineering with plasma? Well this is for you!
+TODO Explain this
+[[File:AutoTEGControllerWiring.png]]
 ==Supplementary Video==