View source for Hot Loop

<tabs>
<tab name="Kondaru">
{{Location
|Picture=KondaruHotLoop.PNG
|Function=Blazin'
|Access=[[Chief Engineer]], [[Engineer]]
}}

As part of powering the [[Engine Room#Kondaru|engine]], you need some cold gas and hot gas. This room, found west of the engine proper - itself found in the northern part of the station, inner side - concerns itself with the latter, by running gas under the heating chamber and/or directing it towards the furnaces, all in the [[Engine Room#Kondaru|engine room]] proper.

Wrench gas canisters down and open the relevant valves. The upper pair feeds into the hot loop, while the lower pair feed into the [[Engine Room#Kondaru|combustion chamber]]; you'll also need to use the [[Pump Control Room#Kondaru|Pump Control Room]] to let the lower ones actually feed into the chamber. The middle one leads directly into space, which you usually probably don't want to do.

==Maintenance Information==
There is no vent. You might want to make your own sort-of vents by RCDing the floor apart, though.

The APC for this room is on the west wall. The lower one you see in the screenshot is for the [[Engineering Gas Storage#Kondaru|Engineering Gas Storage]] room.
</tab>
</tabs>

{{Locations}}